How to draw pine trees step by step. How to draw trees with a pencil How to draw a coniferous tree step by step

In this lesson I will show you how to draw a pine tree with a pencil. This is a coniferous plant, but if you try to draw every needle, you will waste a week. In this way you can draw a pine branch with cones. Nothing more. A whole tree simply won’t fit on paper. Moreover, from a distance the needle is still not visible. The human eye sees only contours.

But pine is different from deciduous trees. Below I will tell you why:

How to draw a pine tree with a pencil step by step

Step one. I am drawing a tree trunk. At the bottom at the root it is wider, but towards the top it becomes narrow and completely disappears. I use circles to show the places where the leaves will be. Step two. From a distance, neither needles nor leaves will be visible. But coniferous trees will have vegetation similar to green clouds. I draw clouds. Step three. I draw thin pine branches. I'll make the clouds fluffier. Step four. If you add shadows, it will be even more beautiful: I have also made drawing lessons for you on other trees. Try to picture it.

Now we will look at how to draw pine trees using a pencil. We are talking about a coniferous plant. However, if you try to draw every needle with a pencil, you could waste a week. In this way, you can depict only a pine branch covered with cones. The whole tree will definitely not fit on paper with this approach.

Warp

So, let's begin a step-by-step examination of the question of how to draw pine trees with a pencil. Let's start with the fact that needles are not visible from afar. The human eye in this case distinguishes only contours. However, pine is different from deciduous trees. Next you will find out what exactly. At the first stage, to draw a pine tree with a pencil, we draw a tree trunk. Below, closer to the root, it becomes wider. In the upper part the trunk narrows, and then completely disappears. Using circles we show the places where the leaves will subsequently be placed.

Branches

Let's move on to the next stage. From a distance neither leaves nor needles are visible. However, in the case of coniferous trees, the vegetation resembles green clouds. We draw them. Let's move on to the next stage. We draw thin branches of our pine trees. At the same time, we make the “clouds” more fluffy. Now comes the next stage in creating the painting. Add some shadows to make the image more natural.

You already know how to draw pine trees with a pencil, however, there are a few more general tips for depicting trees on paper, which we will now consider in detail.

The main thing is to make our plant as realistic as possible. Trees should not have clear outlines. If you try to draw too many leaves and branches, the work can become difficult and take too long. The drawing becomes more alive when using the possibilities of light and shadow.

When depicting a tree, do not forget about the ground line. If the composition of the drawing allows it, then we carry it out first. It is better to depict tree branches of varying thicknesses. When creating “clouds” with needles, it is important to achieve maximum pomp, volume, lightness and liveliness.

The lower part of the base of the tree can be made darker, and the upper part lightened, since it is exposed to the sun's rays. It should also be taken into account that pine needles grow with different densities; this must be shown when depicting a “cloud”. The creation of deciduous trees has its own characteristics. So we figured out how to draw pine trees with a pencil.

Instructions

Start with the trunk, which in pine trees growing in the forest or in open space is straight and fairly thin. Draw a very narrow and long rectangle in the middle of the landscape paper, tapering towards the top. In a field pine, the trunk can bifurcate in the first quarter from the ground.

Start drawing the branches growing from the pine tree almost perpendicular to the trunk. However, you should not depict branches with straight lines - it looks unnatural. Draw broken, intricately curved lines and do not forget to divide a large branch into several small ones as it moves away from the trunk. Remember that a pine tree grown in the forest is very different from a field pine - the latter has a dense crown starting one and a half to two meters from the ground, while a forest pine has most of the trunk devoid of branches.

Place branches not only on the sides of the trunk, but also on the back and front. The branches located directly in front of the trunk will appear the shortest and at the same time the densest, and the branches behind can not be drawn in detail, limiting yourself to shading with a pencil. Also note that the pine branches become shorter and thinner as they approach the top of the tree.

Draw the pine needles. Using confident pencil strokes, go over the ends of the branches, making the tree “fluffy.” Branches that are far from the viewer do not need to be drawn in too much detail - the needles can simply be indicated by shading. An old tree may have lower branches that are dry and bare or broken.

Add shadows. Try to place them correctly in one direction, focusing on an imaginary light source. By using deeper shading on the sides of the trunk, you can show its cylindrical shape. Shadows from the branches will add expressiveness to the picture.

Video on the topic

Useful advice

Note the individual characteristics of trees: a broken branch, a hollow, a bird's nest. Such details will make your drawing more realistic and interesting.

Sources:

how to draw a pine tree step by step

When creating cartoon drawings, the artist is faced with the need to draw nature so that it looks both quite natural and at the same time does not stand out from the general plan. You can draw tree bark using Photoshop, even if you do not fully master all the tools.

You will need

- Photoshop program;
- photo of a tree.

Instructions

Create a new document in Photoshop. Select a standard round brush (size 40 px, opacity 40%) and paint the trunk using many long strokes. At the same time, change the pressure on the pen to get a slight “striation”. If necessary, make branches; the strokes should extend slightly into the trunk.

On the side where the sun will be, make a few strokes with a lighter brush (of the same shade), and on the opposite side darken the trunk a little. At the very edge of the dark side you can draw the darkest strokes - use photographs of real trees as a guide.

Create a new layer for the fibers. Using an opaque round brush (size 8 px), paint the wood fibers in the form of a rhombic network. The color you need is the darkest one used previously. Select the optimal transparency using the Soft Light blending mode.

On the same layer, using a 4 px brush with 60% transparency, fill each cell of the network with fine shading. Try to ensure that adjacent fibers have shading in different directions. You can add a few cracks between the fibers.

How to draw a pine tree.

Pine is an evergreen coniferous tree. and, since spruce is also a coniferous tree in the same color in winter and summer, they are often confused. That is, I know that my students don’t see much of a difference. And she is. Now let’s figure it out. Let’s start with the lesson “how to draw a pine branch.”

Let's start drawing with a diagram of the branch. The branching is whorled. That is, the side branches do not grow one by one, but several at a time from the nodes.

Spruce needles are single and short, they are sharp and usually quite straight. They grow on the branch in an orderly and even manner (like a lawn))). Pine needles grow in pairs, they are long and can be straight, but this is rare - usually they are arched or generally twisted. The direction of growth of the needles is approximately the same, but at the same time they - some in the forest, some for firewood - stick out out of order.

Let's draw exactly as we see it - are the pine needles tousled? - So we draw:

Resist the temptation to draw the needles even and neat, draw as if they were true. And for this, it’s best to have before your eyes not only a lesson on “how to draw a pine tree,” but also a living pine tree itself, to be honest.

There is a wide variety of trees in nature, as well as a wide variety of animals or birds. All this huge variety is classified according to different criteria. But for the artist, the features of the appearance of the tree are important. And in order to learn how to draw it, you need to observe the shape of the trunk, the shape of the branches, leaves, and the shape of the entire crown of the tree. After all, each breed has its own characteristics. Therefore, we will discuss these features of 6 types of trees - maple, birch, pine, spruce, willow and oak (but I recommend reading first).

Maple.

The maple trunk can bend and branch, which gives it a sinuous shape.
The bark is dark in color and generally similar to the bark of most trees.
The top of the crown of this tree is rounded, but may also have an irregular shape.
The maple leaf is known to have a pointed shape, similar to a star. Large masses of maple leaves create a “spiky” texture of the crown surface.
When shading the crown, you can also use longitudinal strokes, but to show the character of maple foliage, it is better to add a “clumsy” or “prickly” textured stroke to the drawing, similar to maple leaves (I wrote about the texture of shading). The same principle should be followed in painting, painting the canvas with strokes that would create the illusion of foliage. Considering that leaves and branches are combined into separate groups, the texture of shading and painterly strokes should be varied.

Birch

Birch comes in different varieties. In the middle zone, the trunk of birches is usually straight and “slender”. In other areas, a birch trunk can form a “slingshot”, bifurcating at the root.
The crown of a birch often has an elongated shape, directed upward. However, there are also birches with a spreading, squat crown.
Birch bark is white on the surface. But it has dark “strokes”, which are essentially cracks through which the dark inner layer is visible. The closer to the ground, the more often these “strokes” appear on the bark. “Black lines” are present on the trunk at the base of the branches, i.e. in those places of the trunk from where the branches grow. They can have a triangular or rectilinear shape.
Small branches of birches are so thin and flexible that they hang down, rushing down. The leaves growing on these branches form vertically directed rows. The branches bending towards the ground bend, giving the appearance of birches a special awe and lightness.
In pencil drawing or painting, the graceful character of birch trees can be conveyed by longitudinal vertical shading or appropriate strokes of paint. Pencil movements or brush movements can follow the movement of the branches described above.

Pine

The pine trunk is straight. However, there are pine trees with a trunk that bends at the top and have a “stocky” character. Often there are ship pines in which the crown is located at the top of the tree and the trunk is straight and tall.
The bark of this tree has a red color, which, as it approaches the ground, becomes much darker, turning into gray-brown. In the middle of the trunk, the pine bark resembles a flaky, scaly structure. Closer to the ground it becomes coarser and forms a dense, cracking layer.
The crown of young pines has a triangular, cone-shaped shape. But the crown of mature trees will already be more rounded.
The branches of perennial old pine trees can be twisted and gnarled. As a rule, pine branches do not point very upward. To a greater extent they are directed to the sides of the trunk.
Pine needles are longer than spruce needles. Therefore, they create the feeling of a fluffy crown, which needs to be displayed by graphic means, or painting techniques, if this is not a drawing, but a painting. It is necessary to use a textured stroke or appropriate strokes in painting. Each branch has light and shadow, so the artist needs to think about how to draw the volume of individual branches in the overall mass of the crown.

Spruce and pine have much in common, but they are different trees with their own characteristics. For example, if the trunk of a spruce tree is as straight as that of a pine tree, then the nature of the branches will already differ from the nature of pine branches. The branches of the spruce are slightly curved upward. In the lower tiers, the old branches are lowered down and resemble “paws”.
Spruce needles are shorter than pine needles, so the overall texture of the crown of this tree will differ from that of pine.
The crown of the spruce tree is shaped like a triangle or a cone and consists of tiers.
When an artist paints a landscape, he paints trees in volume. To do this, you need to monitor how the entire tree is illuminated and how individual branches or tiers of branches are illuminated. For example, going inside the crown, the spruce “paw” plunges into the shadow. From the outside, it can remain light because it receives more daylight.
The color of spruce needles is dark and rich. Therefore, both individual spruce trees and the spruce forest as a whole will differ in color from other types of trees.

Willow trees can look different depending on the variety. For example, the weeping willow has branches that are more flexible and flexible than the common willow. Because of this, its branches hang down, rushing to the ground.
Willow is characterized by constant branching of the trunk, as well as large branches.
Willow leaves are narrow and oblong. This greatly affects the appearance of the tree. Therefore, this feature must be reflected through shading or brushwork in painting.
The color of willow foliage is complex. On one side of the leaf the color is green. And on the other - light, gray-green. Therefore, the overall color of the tree is distinguished by gray-blue shades.

The oak trunk is powerful. In old trees it can reach a large diameter at the base. But in dry areas, oaks can be less stocky, looking like slender young oaks.
The branches and trunk of the oak tree are twisted and gnarled.
The shape of the leaves is wavy. Therefore, the general appearance of the foliage as a whole will be “clumsy-curly.”
The bark is rough and dense.
The foliage color is dark green, rich.

Here I looked at the appearance features of only six varieties of trees. In nature there are a huge variety of trees and other plants. How can you learn to draw, if not all of them, then at least a couple of dozen varieties? To do this you need to develop observation skills. If an artist has a good eye and good powers of observation, then it doesn’t matter what he draws. The main thing is to understand nature and notice key points. And what points you need to pay attention to are discussed in the training material. For those who want to learn how to draw landscapes with trees well, it will also be useful to study the diagrams and technique called (I mentioned it at the beginning of this article).