Hair thinning, before and after photos. How to do for thin, curly short curls along the entire length when cutting, how it looks, who suits

Often people do hairstyles and haircuts in specialized salons and hairdressing salons. Many people recommend milling their hair, because this way you can refresh the image and bring in something new and original. If in doubt about the need for hair thinning, the photos taken before and after will help you make a decision.

Types of milling and their purpose

Hair thinning is the cutting of individual strands at different heights. Thanks to thinning, you can make a haircut on sparse hair more voluminous, make adjustments to the shape or even change the look of the hairstyle, make it more magnificent. Hair thinning is done at the roots, tips or along the entire length. To determine how and where to perform a haircut, you can review the before and after photos.

Thinning at the roots is done for extra volume. Such manipulations are performed mainly on the back of the head and crown. Trimming is done using a comb, in which there are rare teeth. The strand must be lifted from the very root and cut a few thin strands at a height of 1 cm.

End milling is considered common, in this case the hair looks natural, and the contour becomes softer. Both straight and thinning scissors are used here, as well as a dangerous battle for thinning. To create a full-fledged image, the master mills the entire length of the hair. It will remove tough and heavy hairs, which will allow you to radically change your appearance.

When is hair thinning needed and who thinning is suitable for?

If it was decided to change the appearance of the hairstyle in the hairdresser's, then hair thinning will certainly be recommended by the master. Almost every hairdresser has photos before and after previous work, so you can make sure in advance of the experience and qualifications of the master. He will also give practical advice in choosing a new image.

Despite this, you need to know who is suitable for milling, and who should look for something else:

• Such a hairstyle will go chubby, because it can hide chubby cheeks and many other flaws. A long, slightly profiled bang will visually lengthen the face and correct its shape.
• For a triangular face type, strong hair thinning is ideal.

• Thinning is suitable for a short haircut and will give the image completeness and playfulness.
• For extended curls, a new look will give the hair a natural look and shape.

Basic rules for thinning long hair

To make the hairstyle look voluminous, and the hair lay down correctly, you must adhere to the following rules:

Rules for thinning short hair

It is not recommended to mill too short hair. The result may not be predictable (it all depends on the type of hair): either the curls will be slick or rise, forming a man's hedgehog haircut. To ensure the correct arrangement of the strands, you need to mill the whiskey and crown.

Thinning technique along the entire length of the hair

A haircut made with this technique will make styling faster and easier, as well as give lightness and ease. An experienced master can easily correct the shape of the face if he does the thinning correctly.

Long hair can be milled using several techniques: mush method, tourniquet and sliding cut. Thanks to the tourniquet method, the hair will gain additional volume from the roots to the tips. You just need to twist the strands in the form of ropes and cut them along the entire length.

A sliding cut is used on slightly damp hair with thinning scissors from the root to the bottom. The scissors should be parallel to the hair and without pressing it to the end. Make a cut at a distance of 1-1.5 cm. Also, craftsmen use simple or thinning razors. Hair is trimmed according to growth in 5-7 movements. The razor is placed parallel to the hair.

The mush technique is used to thin individual strands along their entire length. For proper execution, you need to take scissors without notches and a wide comb. In vertical partings, wide curls are selected and placed between slightly ajar scissors, the ends of which look down. Scissors during work make a semicircle - from top to bottom.

Radical milling

Radical thinning is done across the strands. First of all, they perform actions near the roots, then in the middle and again at the roots. Such a haircut will look impressive and magnificent.

For the procedure, thinning scissors are used, and in the case of straight hair, a dangerous razor. Although the approach of the master is individual, everything will depend on the type and structure of the hair. If the hairdresser is a professional in his field, then he can use ordinary scissors. This technique requires a lot of effort and practice.

Tip thinning

Filleting the tips is divided into 3 types:

It is difficult to make the right choice regarding hair thinning. Before and after photos will help evaluate the result of the haircut.

Thinning bangs

Bangs require proper care: regular trimming, styling, etc. Laying curls that are thinned out is easier and faster. Milled bangs are not suitable for every girl.

Refuse is for those who:

Milled bangs are suitable for owners of a triangular face type. Before starting the procedure, wash and dry your hair. You can not thin out on wet strands, because then the bangs will be much shorter than necessary.

To profile bangs you need:

• select the frontal curl from the main hair, all that is left to stab with a hairpin;
• using an iron, smooth it out and slightly moisten the tips;
• divide the bangs into 3 identical strands;
• haircut to start with a medium curl;
• before starting trimming, the strands must be twisted into bundles and cuts along the entire length with scissors.

Features of thinning thin hair

If it was decided to do the procedure, then thinning should be light, slightly noticeable. A good option would be to process the upper curls, and make a straight cut on the sides and bottom.

Despite the successful thinning, the volume will need to be created manually using a comb, hair dryer or iron.

Features of thinning thick hair

On thick hair, you can do deep and thorough thinning. It will help to properly distribute the volume and make the hair lighter.

For thick hair, basal thinning is suitable. It will reduce the volume and create the impression of separate, elegant curls. Hair particles are cut along the entire length from the root, diagonally 3-4 mm wide. The distance of each step is approximately 1-2 cm.

This technique is also used to correct the shape of the face. To achieve the goal, you need to use any of the following methods: plunge, sliding cut, mush.

Features of thinning curly hair

Thinning is a great solution for those with wavy hair. The procedure will make them flexible and obedient.

For thinning curly hair, hairdressers never use thinning scissors. They are mainly milled with straight scissors, and pointing is considered the ideal technique. The shape of the haircut does not matter, it all depends on the desire of the client. The stylist can only express his opinion on how this or that form will look depending on the shape of the head, figure, etc.

Thinning will negatively affect the health of the hair - the ends suffer greatly.

Thinning technique with scissors

To thin out curls with ordinary scissors, considerable experience is required. The curl is pulled at a slight angle, the open scissors are placed perpendicular to hair growth. Immediately perform 2 operations: slightly connect the ends of the scissors, sharply shift them to the ends of the hair. The method requires accuracy and care, otherwise you can cut off more than necessary or a whole strand.

Thinning methods with straight scissors:

Thinning with thinning shears

Filleting scissors are used for shading and thinning. They are one- or two-sided. In the first, the teeth are placed only on one edge, respectively, in double-sided ones - on both blades. During the use of such tools, the hair that falls on the teeth is cut off, and all other hairs are intact.

Milling is done on dry, clean hair. To create volume on a bang or crown, the master selects vertical curls and mills from bottom to top. Thus, the short lower hairs will raise the upper ones. To create a lush haircut with a gentle look, use the “saw teeth” method. The hairdresser cuts the hair from the roots by 2-3 cm.

Using the sliding cut technique (scissors cut the hair from the middle to the ends), a hairstyle of different lengths is made. The end result is the appearance of volume.

"Plucking" - cut the strands at the same length and distance, the scissors "work" perpendicularly. So you can refresh the look of the hairstyle, add lightness to the image. You can mill the tips in the vertical and horizontal position of the scissors.

Horizontally: the hair is straightened and cut about 5 mm across. Vertical: strands are placed at an angle of 30 ° and cut with a cloth to the bottom. To thin out the hair roots, you need to straighten and wrap small strands across: first of all, at the very roots (5-10 mm), in the middle and at the tips.

When working with thinning scissors, it is necessary to pay attention to the type of hair, for example, it is undesirable to mill coarse hair - it will stick out in all directions, and thick and soft hair should be thinned deeper, then the hairstyle will be much more magnificent. Shaving hair with a razor must be done on wet hair.

Thinning with a razor

Shaving hair with a razor must be done on wet hair.

Haircut rules:

Pointing

The pointing method is used in almost all haircuts, and milling is no exception. The main purpose of potting is to give the ends of the hair the shape of teeth. With one movement, the length is cut and the hair is milled. The finished haircut looks like a fringe, it becomes more magnificent, and the image is softer. Important - Poyding is done on clean and dry hair.

The execution technique is simple: you need to lift the strand at a slight angle, leaving any length of hair. The cut is best done 1 cm deep. Deep ponting is recommended for thick or coarse hair.

The cut is made with the tip of scissors, which are placed at any angle to the growth line. The sharper it is made, the less thinning will be noticeable.

Dotted cut pointcut

Often it is used to give geometric shapes to the hairstyle. This is both a haircut and thinning at the same time. The initial result of this technique is the textured edges of the curls. Hair should be cut with the edges of the scissors, which are perpendicular to the strands. The depth of cuts is not more than 2-3 mm.

The disadvantages include a long procedure.

Picketage

Suitable for short haircuts, gives the ends of the hair the right position. To perform the technique, hair is cut over a comb. Curls are combed against growth.
Those that peek out from behind the teeth of the comb are cut out with the tips of the tool at an angle of 50 °.

Harness method

Used to add volume. The hair is divided into several small curls, twisted in the form of a rope and small cuts are made along the entire length.

Cutting method

It is used to add splendor to hair. The tips lie down after the procedure naturally and easily. Curls of different lengths are cut. The scissors are placed perpendicular.

sliding cut

Hair cut using the slicing technique acquires a beautiful, elegant look, becomes obedient. In the process of cutting with a cut, an oval is formed from the hair along the contour of the face. Used to combine zones, achieve volume and the correct texture of the strands.

The technique is suitable for milling bangs. Use sharp ordinary scissors. Before the procedure, the hair is slightly moisturized. Pull a small strand with your left hand. Moving from the top down, cut small sections of the strand with scissors. For a short haircut, the scissors should touch the head.

Thanks to the technique, you can make a ragged or smooth cut.

Mush technique

This technique is used both for texturing individual strands, and for a full-fledged haircut. A characteristic feature of the method is that after manipulations, the hair itself is divided into curls, the ends of which are slightly tucked up.

Scissors are taken without notches. It is desirable to comb the hair and divide it into strands with vertical partings. Each of them is placed between the blades of the scissors, the edges of which move down. A sliding cut is made from top to bottom in a semicircle.

Do-it-yourself hair thinning methods

With your own hands, you can perform any of the above thinning techniques. Some of them require skill, so you need to start with simple ways to thin your hair.

Before thinning the hair, you can take a photo of their condition, and then compare the initial and final appearance. In this way, you can choose a method that will be convenient to use in the future for an independent haircut.

Before thinning, you need to prepare tools: scissors or a razor, a comb, hairpins and a mirror.

1. You need to take a strand of hair in your hand and make cuts with scissors at an angle of 90 °. The comb is parallel to the tip of the tool. Using the method, you can thin out long hair partially or along the entire length. After a complete thinning, you can lose 2/3 of your hair.
2. To trim the bangs, you need to slightly wet it. The scissors must be placed perpendicularly. Trim the bangs, starting from the center, touching the edges last.
3. Owners of sparse hair can be parted, half thrown forward and cut to the required length. Do the same with the second half.
4. Tie long voluminous hair into a ponytail at the crown, throw it forward and slightly moisten. Position the tool perpendicular to the body. The cut is made in several approaches.
5. Thinning curly hair takes a lot of time and effort. You need to cut in small strands. Pin up the main part of the hair and start cutting with small curls. Plus curly hair - curls will hide small flaws after thinning.
6. Getting rid of split ends is easy - just twist your hair into a bun and cut off the damaged part.

When You Shouldn't Filtrate

• hair is sparse, rough and thin in structure;
• had a perm;
• by nature, curls curl;
• she doesn't fit her hair.

For a final decision, you can see photos of milled hair that were made contrary to the above arguments, and compare the result before and after the procedure.

Thinning should fit the shape of the face, hair type, image of a woman. Compliance with the rules during hair thinning will emphasize the image. You can take a photo before and after, which will allow you to compare the result of the haircut and analyze the errors.

Hair thinning video

Correct hair thinning:

How to cut your hair at home in 10 minutes: