How to draw autumn leaves with a pencil step by step. Draw leaves and flowers with a pencil

Hi all!

Today we will talk about how to draw autumn leaves (and not only autumn ones). I will show you the patterns of drawing leaves.

So how to draw a maple leaf?

I offer several options and several schemes.

To begin with, I want to draw attention to the fact that all large veins must pass into the stalk.

Moreover, the midrib divides the leaf exactly in half.

We draw a maple leaf (scheme No. 1)

To draw a maple leaf, start with an oval. Divide it in half with a vertical line, outlining the two halves. Draw each half more clearly. Add cloves along the edges of the leaf and get a maple leaf.

We draw a maple leaf (scheme No. 2)

Start by displaying the leaf shape. Note that the maple leaf has five main veins that converge into one "knot". Mark each vein. Connect them with lines to make the sheet even. Then draw jagged edges.

We draw a maple leaf (scheme No. 3)

Let's start with a square. Divide it in half, depicting the spine. From the middle of the sheet, draw three veins, as shown in the figure. And then around each vein - teeth.

We draw a maple leaf (scheme No. 4)

We start with veins. We draw them, as shown in the figure. Dots mark the deepest cuts of the sheet. Then we draw the spine. And then - the most prominent parts. We smoothly connect them with the marked points and get a maple leaf.

How to draw an oak leaf?

Very simple. We start with a tapered oval. In the middle of the oval, draw a vein that goes into the spine. Then the edges of the sheet, which look like waves.

We draw an oak leaf (scheme No. 2)

We start with the shape of the leaf and divide it in half, drawing a vein that goes into the spine. We form the borders using a wavy arc. We give it a clear shape and edges.

Each sheet has its own main characteristics or features. What is on each sheet?

1. Stem, also known as the main axis.

2. Sheet plate, which has a certain shape.

3. Veins.

Drawing leaves must begin with axes. Below is a simple example of drawing a branch with leaves. To begin with, we will draw the lines of the trunk and the lines of the axes of all the leaves. Then we will give the leaves a shape with the help of leaf plates, and the final step will be the addition of veins. This is all that is needed for the initial sketch of the trees with leaves.

Another example of how to draw leaves using veins.

Draw an oak leaf

Below is an example of how to draw an oak leaf step by step. Based on this, you can draw another leaf of any tree. Here everything depends on your artistic attentiveness and observation.

As we can see from the sketches below, first we need to draw the central axis and the borders of the sheet. Next, draw the veins or wreaths of leaves. After that, at the third stage, we draw the appearance of the sheet - a wavy arc. And the last step is a general view and finished strokes - small shadows near the center and some veins, so that the viewer and you can clearly see that the oak leaf is not flat, but has volume and some shapes.

Keram Kioto offers hinged ventilated facades. Hinged facades made of porcelain stoneware under natural stone, wood and other materials. Facade of any complexity and for any building from professionals.

How to draw a maple leaf

If you still have questions and unresolved problems with drawing this part of any deciduous tree, then here's another example for you. In this example, we will go through step by step how to draw a maple leaf. In principle, drawing a maple leaf is not much different from an oak leaf or another tree, except that the maple leaf has not one central axis, but as many as five, according to the number of leaf petals.

Dots mark the lower edges of the petal, where it will go into the next petal. This is necessary for convenience and to create precise symmetry. If you do not apply such marks, then the sheet may turn out to be uneven and asymmetric.

Next, draw the spine (the spine is an important part of the leaf, especially if the leaf has fallen off the tree). With careful movements, connecting all the control points and observing the characteristic shapes of a maple leaf, we draw it and as a result we get a neat little leaf that can be painted over and get a realistic look.

Drawing tree leaves with children should begin by studying their shape. The most convenient time for this is summer and especially autumn. After all, in autumn the leaves become so beautiful, colorful. And do not tear them from the trees - the leaf fall itself throws such beauty under our feet!
Compare the leaves of several tree species with children, find similarities and differences in them.

Different, of course, the shape of the sheet plate. And the similarity is that almost all leaves are symmetrical about their center. This center is the vein into which the cutting passes. Smaller veins depart from this main vein to the left and to the right, very small from them. The location of these small veins on the leaves of different tree species can vary greatly.
Consider the leaf plate and try with the guys to determine which geometric shape the leaf is most like: an oval (oak, alder), a triangle or a “heart” (linden, birch, poplar), a thin and long rectangle (willow), etc.
To help introduce children to different trees, a tabletop will help you
We draw this geometric shape, in the center we divide it with the “main” vein, which passes into the stalk.

Along the edges we outline the cloves, as on a leaflet. And then color the leaf.

When painting leaves with paints, it is better to start from the edges. Outline the leaflet with paint of a suitable color, and then paint over the entire leaflet with smooth lines from the edges to the center. The veins should usually be slightly lighter in color. Here is a "tricky" way to highlight these places. Take a clean brush, moisten it with water and swipe it on the areas you want to see lighter. Take a paper towel and gently press down. The ink will be absorbed into the loose paper, and light spots or stripes will remain on the drawing.

Oak leaves - step by step drawing with children

An oak leaf is a rather strongly elongated oval, and closer to the handle it becomes narrower. The edges of the leaf are like waves.

The scheme of phased drawing with children of oak leaves.

Maple leaves - step by step drawing with children

The maple leaf is one of the most difficult for children to draw. Even a “simple” geometric figure into which this leaf can be entered presents a certain difficulty. This is a polygon. The thing is that the maple leaf has as many as five “main” veins. They diverge like an open fan from one base point. And around each such vein is, as it were, its own independent leaflet. The edges of the leaf are also difficult - these are sharp teeth, and between them there are smooth lines-hollows.

The scheme of phased drawing with children of maple leaves.

Branch with lilac leaves - step by step drawing with children.

Drawing branches is already a difficult artistic task for children. Before proceeding with its implementation, carefully examine the branch and ask the children to say how many leaves are on the tree, are they all the same size? And the colors? Pay attention to the fact that the leaves are directed differently relative to the branch. Drawing branches with leaves in any case involves working with perspective, so it is more suitable for school-age children. You can draw with preschoolers.

The scheme of phased drawing with children branches with leaves.

In this lesson, I'll show you how to draw a maple leaf with a pencil step by step. This is a simple lesson that even a beginner can handle.

Before drawing a complex shape, you must imagine how it works from the inside. For example, a maple leaf is not a simple figure. But if you study its structure, it will become much easier. Here is the maple leaf:

How to draw a maple leaf - an easy step by step drawing lesson

First, look at the maple leaf in the picture above. Think about its basic shape. Look at the stem. Notice how it continues to the tip of the leaf. Look at the "ribs" of the leaf. Think about the corners where they meet the stem. Now you can draw the main shape. Always try to see the basic shape first and leave the details for later. Follow the step by step instructions below.

Draw a square....then draw a stem through the center.

2. Look at the edges of the leaves. Imagine the corners where they abut against the stem. Note that they fold into a "V" at the top and sides of the sheet.

3. Now draw the outline of the sheet. You can refer to the square you drew in the first step.

To make it easier for you, the main lines are highlighted in color below:

3.1 At the bottom of the sheet, draw the shape of a flattened letter "W". At the top, draw an inverted "V".

3.2 Now draw 3 letters "J" (2 inverted).

3.3 Now draw the number "7" on the right and the letter "Z" on the left side of the sheet.

4. Now draw the outer corrugated shape of the edges of the sheet.

If there is no fantasy or you want to plunge into the autumn magic a little, spend time with your child drawing a maple leaf. This is an interesting activity with a lot of bright colors and a positive charge of emotions.

Maple leaf is one of the most beautiful. Besides what he has original shape with five pointed ends, its color is very bright and colorful. It does not matter for what purpose you need to depict this drawing, for a children's competition or an autumn landscape, this useful pastime for any person.

Drawing a maple leaf is easy. This will help you step by step sketches:

First of all, you should draw the frame of the sheet. To do this, you need to draw an arched vertical line - this is the leg of the sheet.
Then freehand draw two horizontal intersecting lines. This is the basis for its five-pointed form.
Circle the tips of the drawn lines, and then erase the sketch inside the drawing. The base is ready!

How to draw a maple leaf step by step

After that, start detailing your drawing. It is necessary to make sharp tips along the edges of the leaf so that it looks realistic.

Drawing detail

After that, erase the extra sketch lines and draw characteristic veins on the leaf.

Veins on a maple leaf

After that, you just have to paint the sheet in colorful colors: yellow, orange, brick, brown, red, green. The leaf can be monophonic, can have many shades.

Maple leaf coloring option

Maple leaf image and outline, template

If you do not have the artistic skills, time, or even the inclination to painstakingly draw a maple leaf, you may a template will come in handy. This template can draw on a blank sheet of paper and then color to your liking. So you get neat and beautiful drawing.

Templates for drawing a maple leaf: