How to clean frosted glass. How to clean frosted glass? What products should you avoid?

Along with ordinary, solid doors covered with veneer and plastic, doors with glass inserts are very popular, and if transparent doors do not require special care, the question is: how to clean frosted glass, occurs quite often. This is not surprising, since translucent inserts have a rough surface and therefore get dirty quite quickly. However, today there are many cleaning products for various materials, and among them there are those that will solve problems with frosted glass.

Before cleaning the frosted glass...

In order to decide on the choice of detergents for processing a particular coating, you must first become thoroughly familiar with the material that will undergo the cleaning procedure. Glass is no exception, regardless of whether it is transparent or not. So, what is this fragile but necessary household material? We will not focus on the fact that it has an amorphous-crystalline structure; this data will not tell housewives whose children have left clear fingerprints on the transparent surface.

Glass is obtained by melting sand from certain mineral formations. In addition, there is acrylic glass, the production of which requires a special polymer, obtained artificially using special technologies. At its core, it is nothing more than plastic, but its characteristics are higher than those of conventional glass industry products. In particular, it is 5 times more difficult to break this polymer analogue. Both types come in either clear or matte.

Today, cloudiness is imparted to any type of glass using exactly the same method - chemically, using etching. At the same time, silicate sheet products are matted with hydrofluoric acid, which easily corrodes many mineral inclusions. To preserve partial transparency from the effects of a caustic substance, cover the edges of the sheet. Acrylic glasses are made frosted using other chemical processes. The sandblasting method also still exists, but it is used at the artisanal level, in small workshops. After this, the glass is sometimes coated with a special varnish, due to which it remains smooth and lasts longer.

How can you wash frosted glass and what can you do with it?

So, if the door has a translucent insert that does not block light, but very limited visibility, then you have either silicate or acrylic glass (plexiglass). It is not difficult to distinguish them. For example, if you lightly tap glass or a polymer-based material with metal, the sound will be louder in the first case. Why are these checks needed? It's simple Not all cleaning products are equally suitable for regular and plexiglass; what cleans the first may corrode the second.

A striking example of this is that even for an ordinary silicate product of the glass industry, you cannot use such strong agents as acetone and gasoline, let alone polymer materials. It is also under no circumstances recommended to use household chemicals that contain acids, such as drain cleaners. It would also be a mistake to use silicone-based compounds, as this will only worsen the condition of the matte surface. Plexiglass should also not be treated with alcohol-based solutions.

But how to wash frosted glass if there are so many restrictions? First of all, with special cleaning products, as well as some folk methods. Thus, ammonia, a solution of vinegar or salt (2 tablespoons per liter of water), and ordinary laundry soap, grated and dissolved in water, are excellent for treating matte silicate surfaces. Many housewives actively use potassium permanganate to wash frosted glass. Of the purchased products, it gives excellent results " Mister Muscle» in combination with a soft cloth.

What and how to clean frosted glass on a door if it is heavily soiled?

The biggest problem with frosted door inserts is not fingerprints, which can be removed very easily if timely measures are taken. It’s worse when adhesive from tape, greasy splashes, paint and other quickly hardening and difficult to wipe off stains get on such a surface. In such cases, it is difficult to find a better option than to clean the frosted glass with a chalk solution or special detergents. As an auxiliary tool, in addition to a soft cloth, it is advisable to get a scraper for washing aquariums, with a blade and a hard rubber strip.

Try to use blades or other sharp objects to clean glass as little as possible, and only in the most extreme cases, since at least small scratches will definitely remain on the surface.

Making a chalk composition is very simple; to do this, place two tablespoons of chalk per liter of cool water and mix thoroughly. The result is a cloudy liquid, which is applied to the surface of the glass using a spray bottle or a regular sponge. After this, you should wait until the solution dries and carefully remove the frozen chalk stains with a scraper, dry paper or napkin. Together with them, both glue and grease can be easily removed. An equally strong alternative to this product is a solution of bleach, which is enough to put only 50 grams per liter of water. The processing method is the same.

Using " Mister Muscle"or another product similar in principle of action, you should not rush to immediately wash off the applied composition. Before cleaning the frosted glass on the door, generously cover it with the selected liquid, try to foam it with vigorous movements, and then leave it to dry. Then, when the foam has completely hardened, firmly attach the rubber scraper to the glass and, pressing forcefully, move the tool from top to bottom, removing dirty stains along with the dried product. If extraneous traces still remain, everything should be repeated.

How to properly care for frosted glass?

There are many secrets to keeping crystal or ordinary transparent glass in perfect condition, which to some extent also apply to frosted glass. For example, you should not wash the glass with hot water, as this leaves streaks on them that only go away with time. To ensure that translucent inserts always transmit light well and do not retain traces of fingers and palms, daily care of frosted glass with soft natural suede or a velvet cloth is recommended.

It is best to wash glass with cold water in which a little vinegar is dissolved, but you should not allow already clean surfaces to slowly dry out on their own. Large microfiber cloths are needed for both cleaning and subsequent wiping. You can get the shine of a transparent and matte surface using 1 tablespoon of starch diluted in a liter of water. By rinsing the glass with this solution and wiping it dry, you will achieve an interesting effect - the treated door inserts will remain clean longer, unless, of course, you intentionally stain them. Another secret to keeping glass clear is to clean it only in the evening, since ultraviolet rays falling on wet glass make it dull.

The problem of how to clean frosted glass from grease stains on doors is most often faced by families with small children. Toddlers are not as careful about their hygiene and are not concerned about the need to keep things around them clean. For this reason, the glass quickly becomes covered with small shiny spots, which is why their matte splendor suffers.

Considering the specifics of the material, it is quite difficult to wash it from such stains and not damage the texture of the product. Traditional glass processing techniques will not help here; the approach must be special.

Methods that are prohibited to use

It is very difficult to wash a specific surface due to the characteristics of its coating. A matte image on the simplest glass appears as a result of sandblasting or acid exposure. Contrary to popular belief, the resulting rough texture is very sensitive to external influences. Before cleaning these doors, you need to consider the following points:

1. The use of abrasives against stains is prohibited, because Along with dirt, they will remove the spraying itself.
2. It is also better not to wash frosted glass with compounds containing silicone, acid and alkali. In addition to greasy formations, they will also dissolve the top layer of coating.
3. In this case, a glass scraper and the traditional cleaning option with newspaper will not give the desired result and will not even be able to remove excess moisture.

It turns out that the approach to the material should be radically different from that used when working with ordinary glass. In practice, everything is not so difficult, you just need to wash the coating regularly so that dirt does not accumulate in layers.

Frosted glass processing steps

The easiest way to get rid of greasy deposits on doors is while they are still fresh. Depending on the degree of contamination, the procedure may require one or more cleaning steps. Experts and experienced housewives recommend treating frosted glass with the following compounds:

• Chalk solution. Take three tablespoons of crushed white chalk for a glass of warm water and stir thoroughly. We wet a soft, lint-free cloth in the resulting mixture and go over both sides of the glass. We wait until the composition dries, then we wipe off the remaining chalk with a clean cloth.

Tip: When working with greasy stains, it is recommended to first apply the prepared compounds to the surface of the stains, and then distribute them over the entire surface of the glass part of the door, then it will be easier to wash them. The positive effect will be more pronounced if you additionally act on the dirt with plastic spatulas or chamois for windows.

• Using ammonia gives a good result (take a tablespoon of the composition per liter of water). The resulting solution should not only be used to wash the surface, but rather to blot it. It is best to use microfiber to remove product residue. It absorbs water well and does not leave streaks.
• Vinegar helps with greasy stains. Dissolve a spoonful of 9% solution in a glass of hot water and use it to treat problem areas. Then we wipe the entire surface of the frosted glass with window cleaner. If soap foam appears during the processing process, it can be washed off with clean, cool water.

• Numerous greasy marks can be washed off using dish gel. The biggest problem with this approach is removing soap scum. It is best to blot it with microfiber or a clean sponge.
• Old contaminants are not susceptible to the listed types of influence. To clean them you will have to use acetone or rubbing alcohol. It is best to carry out the treatment point by point, using a cotton swab or sponge, otherwise the smell of the product will take a long time to dissipate even with the windows open.
• Frosted glass can be cleaned with steam mops, steam generators or steam cleaners. After such intensive treatment, all that remains is to walk over the surface with microfiber, removing excess moisture.

A door with frosted glass is a decoration for your home. Its translucency gives the interior an oriental mystery, slightly reminiscent of a Chinese shadow theater. But the matte surface is rough, dirt eats into it strongly, a simple damp cloth is not enough. Therefore, it is important to know how and with what to wash such doors.

Use a soapy solution to knock out fresh dirt:

Apply to a sponge. Rub dirty areas thoroughly.

Wash with lukewarm water.

Dry with a soft cloth.

The soap solution is also suitable for prevention. Clean frosted glass with it at least a couple of times a month.

Just be aware: dishwashing detergents contain a lot of foam. Clean it with a sponge or microfiber. The most powerful remedies include:

"Mister Muscle". With its help, you can easily remove dust and small greasy dirt on the frosted glass of the door.

Pril and Ajax. Will overcome old greasy stains, remove traces of glue and grease

The sun's rays harm wet matte surfaces no less than all those annoying vampires. Therefore, clean in the evenings.

Ammonia

With ammonia you can easily clean fresh fingerprints, “marks” of tea and grease:

For one liter you take two tablespoons of ammonia.

Moisten a soft cloth in the resulting mixture and rub the glass.

You dry it. Use microfiber or a suede cloth to prevent drips.

Ventilate the room.

With the help of starch, you can easily free the glass on the door from not very “corrosive” greasy dirt and glue:

Dissolve a spoonful of starch in one liter of running water.

Use the resulting mixture to thoroughly clean the glass from dirt.

Wipe dry with microfiber.

Starch is also an excellent preventative. Clean the glass with potato powder several times a week, and everything will always be “good” with them.

Vinegar solution

Praying with Vinegar will drive away old traces of grease and fresh coffee “prints”:

Heat the water a little and dilute vinegar in it.

Soak a soft cloth in the prepared mixture and wipe the glass.

Use microfiber or suede to dry the matte surface.

After cleaning the glass, treat it with car polish so that dust and dirt no longer stick.

Baking soda and soda ash are another warrior for fighting fresh stains. It is also quite good in combating traces of coffee and glue.

Wet a paper towel. You pour baking soda on it.

You clean the dirt.

Wash with water and wipe thoroughly with a soft cloth.

Potassium permangantsovka

Potassium permanganate will remove old coffee and greasy marks, and will also cope with fresh glue stains:

Put a little potassium permanganate in warm water.

You stir. Do this until the liquid turns a rich dark red color.

Apply to a sponge and wipe the glass.

Wash with running water and dry with a soft cloth.

Chalk mixture and bleach solution

Completely eliminates stubborn fat and tea:

In one liter of running water you put two and a half tablespoons of crushed chalk or three tablespoons of bleach solution.

Pour the resulting mixture into a spray bottle and wet the dirty areas.

You wait for the glass to dry, then get rid of the chalk mixture using paper napkins or a hard rag.

Don't even think about using abrasives or metal scrapers. They will “wash” frosted glass like a chicken’s paw, leaving terrible scratches.

Salt is to a vinegar solution what spinach is to Popeye the sailor - it makes him practically omnipotent.

1. To a liter of water add 2.5 tablespoons of vinegar and one tablespoon of salt.
2. Stir well until the salt is completely dissolved.
3. Strain the resulting mixture so that undissolved salt crystals do not scratch the matte surface.
4. Apply it to a sponge and remove dirt from the glass.
5. Dry with a soft paper towel or napkin.

Steam

Hot steam from vacuum cleaners, irons or special mops does a great job of removing any dirt.

Gently treat dirty areas with steam.

If you use an iron, wipe the glass with a wet rag at the end.

Dry with a paper towel or hard rag.

Acetone and pure alcohol

These aggressive heavyweight liquids will remove absolutely all contaminants. But besides dirt, they can also knock out a matte surface.

Before cleaning, insulate the silicone seals. Just cover them with plain paper or cellophane.

You soak a cotton swab in alcohol or acetone, and carefully treat the frosted glass.

Wash with water and soap.

Wipe thoroughly with a hard cloth or microfiber.

Ventilate the room.

A more gentle means for cleaning plastic windows is a good safe alternative to “aggressors”.

Frosted glass

Let's look at how you can clean frosted glass to make it clean, without streaks or dirty spots. There are many resources available to help.

What products should you avoid?

To preserve glass in its original attractive form, it is important not to use certain common means used when cleaning your home:

• products containing acid and alkali;
• powders that may scratch the surface;
• hard brushes.

Wash frosted glass correctly

The procedure for cleaning frosted glass from various kinds of stains is a fairly easy job. All you have to do is follow certain rules and then there will be no difficulties in cleaning. You must follow the following algorithm of actions:

• First, find out the type and level of contamination to select the appropriate product;
• wet the glass with water and wait two minutes;
• Select the device you will use to clean the glass. For example, a clean soft cloth, suede cloth or microfiber;
• treat the area with the selected product and wipe according to the instructions;
• To ensure that streaks do not appear at the end of cleaning, it is important that after using household chemicals, first treat the glass with a wet cloth, and then with a dry one.

Now let’s look at how to clean frosted glass on doors if there are a lot of difficult-to-remove stains on it that cannot be removed with simple products such as “Mr. Muscle”.

For example, suitable solvents or a chalk solution that you can make yourself will help you get rid of traces of paint, tape, and the like. Plus, you need to buy a scraper that is used for - the device has a blade and a rubber strip.

But this scraper can only be used when absolutely necessary, as there is a high probability of leaving noticeable scratches even with careful use.

This method allows you to get rid of light dirt, as well as grease stains and glue, without much effort.

Correct care technique

1. We do not recommend using hot water to wipe the surfaces, as after this procedure stains may form on the frosted glass, which disappear only after a while.
2. To ensure that the glass conducts the rays of the sun and does not leave hand marks on it if accidentally touched, it is necessary to treat the glass on all sides with a velvet cloth every day.
3. To clean the matte inserts, you need to use cold water, to which you need to add a little vinegar - wipe the glass, and then immediately walk thoroughly with a dry cloth.
4. To restore the shine of the surface, you need to take simple starch: a tablespoon of starch per liter of water. Treat the glass with the mixture and wipe dry, which will lead to an incredible result - the matte inserts will remain attractive for a long time and will not show fingerprints or dust.

If you use other means to treat the glass surface, then we will be glad to receive tips and recommendations from you (or comments on this article). And don’t forget to add the site “Clean.ru” to your bookmarks.

Due to its visual appeal, frosted glass is widely used in modern interiors for decorating interior doors, wardrobes, and tables.

However, this material is sensitive to various external contaminants, in particular grease stains. As soon as you touch the surface with your hand, unpleasant marks immediately remain on it. Let's consider how to clean frosted glass from unwanted dirt?

What is the difficulty of cleansing?

Removing stains from glass is difficult because it is treated with special products to produce a matte and uneven surface. The question that remains relevant is how to remove greasy stains from it, so as not to damage the top layer of glass.

The fact is that special products, the components of which are acid, silicone or alkali, can dissolve not only stains, but also spraying. A newspaper and a glass scraper are also unable to cope with the task. Even though traditional cleaning methods are not suitable in this case, this problem can still be dealt with.

Methods and means for cleaning glass on doors

Try to get rid of fresh dirt. You will have to deal with old stains in stages.
1. You can wash frosted glass with the following compounds:

• chalk mixture, which is prepared from 200 ml of water and 3 tbsp. l. chalk;
• ammonia solution from 1 liter of water and 1 tbsp. l. facilities;
• dilute 1 tbsp with vinegar solution in 1 glass of water. l. vinegar.

Moisten a sponge or soft rag with the prepared mixture and treat the glass on both sides, paying more attention to contaminated areas. If you couldn't deal with them the first time, go through them again. A special suede for glass or a rubber spatula can help the process. Wipe clean surfaces dry.

If you prefer a chalk solution, then after processing, wait a little until it dries, and then rinse it off with warm water. It is best to wipe wet glass with microfiber. It removes water well and does not leave streaks.

2. A good product for treating matte surfaces is dishwashing gel, which does an excellent job of removing grease. This gentle product does not contain components that can harm the glass.

However, it is unlikely to cope with old pollution. Acetone or alcohol will help solve the problem. To do this, moisten a soft cloth in the product and wash the dirty areas. Some housewives use ammonia, which copes with even the most complex stains.

When using these products to clean matte surfaces on doors, proceed with extreme caution. During operation, the products used should not come into contact with the moving elements and seals, and if this happens, rinse them with water and wipe with a dry cloth.

To prevent your household and animals from inhaling acetone or ammonia, send them to another room and work with the windows open.

1. If the grease stains cannot be washed off, you will have to resort to heavy artillery. Use a steam generator or steam mop. Run the device over the entire surface of the glass, and then wipe it with microfiber.

To avoid having to resort to radical methods of removing stains from frosted glass surfaces, try to wipe them regularly with a suede cloth. This will help get rid of dirt in a timely manner, since old stains are much more difficult to deal with.

To ensure that your doors are always in perfect condition and your glass looks like new, use these tips for caring for them:
wash matte surfaces only with cold water, and remove moisture with microfiber or napkins;
Starch can be used to add shine and keep frosted glasses clean. Wipe them with a 1 liter solution. water and 1 tbsp. l. facilities;
To prevent frosted glass from fading under direct sunlight, it is recommended to carry out the water procedure in the evening.

Treat your household items carefully, take preventative measures and follow simple recommendations for their care, then you won’t have to remove serious dirt. You will always be cozy and comfortable in your own home.