What about stringed instruments? Plucked stringed musical instruments

Musical instruments are designed to produce various sounds. If the musician plays well, then these sounds can be called music, if not, then cacophony. There are so many tools that learning them is like an exciting game worse than Nancy Drew! In modern musical practice, instruments are divided into various classes and families according to the source of the sound, the material of manufacture, the method of sound production, and other features.

Wind musical instruments (aerophones): a group of musical instruments whose sound source is vibrations of an air column in the barrel (tube). They are classified according to many criteria (by material, design, methods of sound production, etc.). In a symphony orchestra, the group of wind musical instruments is divided into wood (flute, oboe, clarinet, bassoon) and brass (trumpet, horn, trombone, tuba).

1. Flute - a woodwind musical instrument. The modern type of transverse flute (with valves) was invented by the German master T. Bem in 1832 and has varieties: small (or piccolo flute), alto and bass flute.

2. Oboe - woodwind reed musical instrument. Known since the 17th century. Varieties: small oboe, oboe d "cupid, English horn, haeckelphone.

3. Clarinet - woodwind reed musical instrument. Designed at the beginning 18th century In modern practice, soprano clarinets, piccolo clarinet (Italian piccolo), alto (so-called basset horn), bass clarinet are commonly used.

4. Bassoon - a woodwind musical instrument (mainly orchestral). Arose in the 1st floor. 16th century The bass variety is the contrabassoon.

5. Trumpet - a wind brass mouthpiece musical instrument, known since ancient times. The modern type of valve pipe has developed to ser. 19th century

6. Horn - a wind musical instrument. Appeared at the end of the 17th century as a result of the improvement of the hunting horn. The modern type of horn with valves was created in the first quarter of the 19th century.

7. Trombone - a wind brass musical instrument (mainly orchestral), in which the pitch is regulated by a special device - a backstage (the so-called sliding trombone or zugtrombone). There are also valve trombones.

8. Tuba is the lowest sounding brass musical instrument. Designed in 1835 in Germany.

Metallophones are a kind of musical instruments, the main element of which are plates-keys, which are beaten with a hammer.

1. Self-sounding musical instruments (bells, gongs, vibraphones, etc.), the sound source of which is their elastic metal body. The sound is extracted with hammers, sticks, special drummers (tongues).

2. Instruments such as xylophone, in contrast to which metallophone plates are made of metal.

String musical instruments (chordophones): according to the method of sound production, they are divided into bowed (for example, violin, cello, gidjak, kemancha), plucked (harp, harp, guitar, balalaika), percussion (cymbals), percussion keyboards (piano), plucked - keyboards (harpsichord).

1. Violin - a 4-string bowed musical instrument. The highest in the register in the violin family, which formed the basis of the classical symphony orchestra and string quartet.

2. Cello - a musical instrument of the violin family of the bass-tenor register. Appeared in the 15-16 centuries. Classical samples were created by Italian masters of the 17th-18th centuries: A. and N. Amati, J. Guarneri, A. Stradivari.

3. Gidzhak - stringed bowed musical instrument (Tajik, Uzbek, Turkmen, Uighur).

4. Kemancha (kamancha) - 3-4-string bowed musical instrument. Distributed in Azerbaijan, Armenia, Georgia, Dagestan, as well as the countries of the Middle and Near East.

5. Harp (from German Harfe) - a multi-stringed plucked musical instrument. Early images - in the third millennium BC. In its simplest form, it is found in almost all peoples. The modern pedal harp was invented in 1801 by S. Erard in France.

6. Gusli - Russian stringed musical instrument. Pterygoid gusli ("voiced") have 4-14 or more strings, helmet-shaped - 11-36, rectangular (table-shaped) - 55-66 strings.

7. Guitar (Spanish guitarra, from Greek cithara) - a lute-type stringed plucked instrument. It has been known in Spain since the 13th century, and in the 17th and 18th centuries it spread to the countries of Europe and America, including as a folk instrument. Since the 18th century, the 6-string guitar has become common, the 7-string has become widespread mainly in Russia. Varieties include the so-called ukulele; in modern pop music, the electric guitar is used.

8. Balalaika - Russian folk 3-string plucked musical instrument. Known from the beginning 18th century Improved in the 1880s. (under the direction of V.V. Andreev) V.V. Ivanov and F.S. Paserbsky, who designed the family of balalaikas, later - S.I. Nalimov.

9. Cymbals (Polish cymbaly) - a multi-stringed percussion musical instrument of ancient origin. They are part of the folk orchestras of Hungary, Poland, Romania, Belarus, Ukraine, Moldova, etc.

10. Piano (Italian fortepiano, from forte - loud and piano - quiet) - the general name of keyboard musical instruments with hammer action (piano, piano). The pianoforte was invented in the beginning. 18th century The appearance of the modern type of piano - with the so-called. double rehearsal - refers to the 1820s. The heyday of piano performance - 19-20 centuries.

11. Harpsichord (French clavecin) - a stringed keyboard-plucked musical instrument, the forerunner of the piano. Known since the 16th century. There were harpsichords of various shapes, types and varieties, including cembalo, virginel, spinet, claviciterium.

Keyboard musical instruments: a group of musical instruments united by a common feature - the presence of keyboard mechanics and a keyboard. They are divided into different classes and types. Keyboard musical instruments are combined with other categories.

1. Strings (percussion and plucked keyboards): piano, celesta, harpsichord and its varieties.

2. Wind (wind and reed keyboards): organ and its varieties, harmonium, button accordion, accordion, melody.

3. Electromechanical: electric piano, clavinet

4. Electronic: electronic piano

pianoforte (Italian fortepiano, from forte - loud and piano - quiet) - the general name of keyboard musical instruments with hammer action (piano, piano). It was invented in the early 18th century. The appearance of the modern type of piano - with the so-called. double rehearsal - refers to the 1820s. The heyday of piano performance - 19-20 centuries.

Percussion musical instruments: a group of instruments combined according to the method of sound production - impact. The sound source is a solid body, a membrane, a string. There are instruments with a definite (timpani, bells, xylophones) and indefinite (drums, tambourines, castanets) pitch.

1. Timpani (timpani) (from the Greek polytaurea) - a percussion musical instrument of a cauldron shape with a membrane, often paired (nagara, etc.). Widespread since ancient times.

2. Bells - orchestral percussion self-sounding musical instrument: a set of metal records.

3. Xylophone (from xylo... and Greek phone - sound, voice) - percussion self-sounding musical instrument. Consists of a number of wooden blocks of various lengths.

4. Drum - percussion membrane musical instrument. Varieties are found in many peoples.

5. Tambourine - a percussion membrane musical instrument, sometimes with metal pendants.

6. Castanetvas (Spanish: castanetas) - a percussion musical instrument; wooden (or plastic) plates in the form of shells, fixed on the fingers.

Electric musical instruments: musical instruments in which sound is created by generating, amplifying and converting electrical signals (using electronic equipment). They have a peculiar timbre, they can imitate various instruments. Electric musical instruments include theremin, emiriton, electric guitar, electric organs, etc.

1. Theremin - the first domestic electric musical instrument. Designed by L. S. Theremin. The pitch in the theremin varies depending on the distance of the performer's right hand to one of the antennas, the volume - from the distance of the left hand to the other antenna.

2. Emiriton - an electric musical instrument equipped with a piano-type keyboard. Designed in the USSR by the inventors A. A. Ivanov, A. V. Rimsky-Korsakov, V. A. Kreutser and V. P. Dzerzhkovich (1st model in 1935).

3. Electric guitar - a guitar, usually made of wood, with electric pickups that convert the vibrations of metal strings into electric current vibrations. The first magnetic pickup was built by Gibson engineer Lloyd Loer in 1924. The most common are six-string electric guitars.

Stringed instruments are musical instruments whose sound source is the vibration of the strings. In the international classification, they are referred to as chordophones. The most famous and popular instruments of this class are: guitar, violin, viola, harp, dombra, balalaika, kobyz, gusli, cello and many others.

Classification of stringed instruments

Music is formed by vibrating one or more highly stretched threads, which are a kind of bowstring. This device is called a string. It is stretched between the jumpers on the tool body. Such threads differ in the material from which they are made. It can be copper, and silver, and nylon.

Today, the following types of stringed instruments are distinguished:

1. Plucked. Examples are guitars, harps, balalaikas, harps, dombras, sitars, ouds, ukuleles and more. Here, the main way to get sound is a pinch. This action is carried out either with a finger or with a special plectrum. It is worth noting that some keyboard instruments are sometimes included in this classification. A striking example is the harpsichord, where a plastic reed vibrates along the string.

2. Bowed. The most famous representatives of this group are such stringed musical instruments as violin, kobyz, double bass, viola and cello. To obtain sound, a special bow made of wood and stretched hairs at the ends of the structure is used. Leading such a device along the strings causes a short-term melodic vibration.

3. Drums. These stringed musical instruments require additional accessories to play. This is the little hammer. The piano is rarely considered a percussion string instrument. However, the most famous example would be cymbals. It is noteworthy that all actions with a hammer are performed by the player himself.

4. The rest. All other stringed musical instruments that do not fall into the generally accepted classification belong to an indefinite species. For example, the aeolian harp. For sound extraction, the bowstring will need to oscillate caused by air flow.

Varieties of stringed plucked instruments

Al-oud, or simply oud, is a real cultural asset of the Medieval East. Translated from Arabic, the name of the instrument means "tree". The body has a rounded shape. The neck is relatively short, with no frets. That is why al-oud has such a unique sound. The combination of strings consists of 5 pairs. All of them must be tuned in unison. There are also alternative versions of the instrument with 13 strings. A bowstring is made of nylon, in ancient times - from the intestines of an animal.

The harp is a musical instrument that is known to the world from medieval poems and legends. This is one of the most popular and beautiful representatives of the plucked string group. Currently, there are many varieties of harps that differ in shape, number of strings and sound. The instrument was most widely used in the UK. It is a curved frame with many parallel strings. It strikes with melody and soft overflow of tones.

Another interesting plucked instrument is the dombra, or dambur. It is considered a national treasure of Kazakhstan. It is a kind of guitar with two heavily stretched nylon strings. It is tuned either in fifths or in fourths. The frets must be veined. Located at the very top of the neck.

The most popular Western stringed instrument is the mandolin. The sound is achieved by plucking the four double strings. Such instruments differ in shape: elongated, lute-shaped, flat-bottomed. An unusual representative is the Florentine mandolin, as it has five strings.

Guitar Features

It is the most widely used instrument in the world. It is used both for solo performance and for accompaniment. Suitable for absolutely any direction and style of music, from blues to rock. For example, the Spanish guitar is a stringed instrument that combines the national sound of Western European and Arab peoples. It consists of only five strings. Widespread since the 15th century.

Also, it would not be superfluous to recall the national Russian guitar. Its fundamental difference is the number of strings - seven. It appeared only at the beginning of the 19th century. At that time, this instrument had no equal in popularity. It was played by such virtuosos of their craft as Mikhail Vysotsky, Semyon Aksenov, Andrei Sikhra and many other great musicians.

Nevertheless, today the classical guitar is considered the most common. It comes in different sizes, it can differ in neck fasteners, but one thing remains the same - the number of strings. There should be six of them in a classical guitar. In addition, it has a peg mechanism design. The classical guitar is acoustic and electronic.

The uniqueness of balalaikas

These are musical Russian folk instruments (strings by category, plucked by typology). The balalaika has a triangular body and three strings. To produce sound, it is necessary to hit the stretched threads with your finger at the same time. Such an action in ancient times was called rattling.

The balalaika is a musical instrument that is a symbol of Russian culture along with the accordion. The body can be from 60 to 170 cm. The shape of the instruments is slightly curved or oval. The body consists of six separate segments. The top of the neck is slightly bent back. Frets can be from 16 to 31. The strings on modern balalaikas are carbon. Thanks to this, such a sonorous sound is achieved.

Bandura design

This stringed plucked instrument is considered a folk instrument in Ukraine. The body is always oval, there is a short neck. Bandura is a musical instrument with a huge number of strings. In modern models, there can be up to 64 of them, in old variations - from 12 to 25. The bowstring is stretched from the edge of the neck to the deck. The higher you pluck the neck, the lower the sound will be.

In addition, the bandura is a musical instrument that has a distinctive timbre. It is achieved by a mixed system in registers. To play the bandura, the strings must be plucked. Special thimbles must be worn on the fingers.

Some historians consider the Russian gusli to be the ancestor of the instrument, others consider the kobza. In some chronicles of the XIV century, references and drawings have been preserved that characterize a certain musical subject, which is extremely common in the Kyiv province.

Varieties of the bowed group

These are mainly ancient folk stringed musical instruments. The names of the most common of them are: violin, viola, double bass and cello. All these instruments are the foundation of any symphony orchestra today. Another type of group is the octobas. In the parties, he appears quite rarely because of the low sound. To produce sound, it is necessary to draw a bow along one or more strings. The range of such instruments covers about seven octaves.

Popularity for bowed strings came in the 17th century. Even then, street musicians learned to combine instruments of different timbres into a homogeneous sound. Most often, such impromptu orchestras consisted of violinists and cellists. Interestingly, both the bow and the finger can be used to extract sound from the double bass.

Drum group features

Getting a melody when playing such instruments is achieved by lightly hitting the strings with a special hammer. The cymbals are the most prominent example of the group. In addition, sometimes the piano is used as a percussion instrument, where there is a special autonomous mechanism for this.

Another notorious representative of the group is the clavichord. The principle of playing on it is reduced to pressing on the strings with brass tangenots. The result is a specific sound. The tone depends on the strength and frequency of the impact. A similar procedure can be done with a guitar or violin. Sometimes, to enhance the organic sound, musicians lightly strike the strings with a finger or a bow.

Gut-resonating instruments are considered a separate subspecies of the group. Examples are the didjiridu and the jew's harp.

"Free" string instruments

The aeolian harp is not included in any of the above groups, since the main method of its sound extraction is the vibration of the string caused by the movement of air. Thanks to this, the most soulful and subtle melody is achieved. In ancient times, such a harp was considered the object of the gods.

There is a separate type of string instruments to which keys are attached. In this case, the musician interacts indirectly with the sound design. An example of an instrument is the harpsichord. In it, the strings cling to small reeds.

Some instruments are a combined type. In the Middle Ages they were revered by itinerant musicians. They could simultaneously play a plucked stringed instrument with a bow in the form of a wheel.

Extracting sounds

For this procedure, the string must be stretched to a certain limit. Any touch to it produces a sound. The strings are tuned so that in the end the musician can hit the desired notes. It is possible to influence the bowstring by means of a pinch, a blow, a bow, a stream of air.

The stronger the tension of the string and the smaller its thickness, the thinner the sound will be. The tonality is also affected by the length of the bowstring, the number of frets, the size of the body and drum, and the length of the neck. The melody depends on the material of the string. Copper ones sound louder, silver ones sound thinner, nylon ones sound dull and rough, etc.

The extraction of notes is also affected by pinching certain frets with your fingers or an object. When playing the guitar, this action is called a chord.

Impact on the strings

The most difficult and painstaking procedure for sound extraction is considered to be that of the violin. To play this instrument, the bow must move along the strings, centered between the low threshold and the fretboard. The position is perpendicular to the face of the violin. To change the timbre, move the bow closer to the lower threshold of the body.

Playing plucked instruments requires knowledge of a certain sequence of notes. The touch with the string occurs in the middle of the drum. And it makes no difference whether it is a guitar or Russian stringed musical instruments, such as a balalaika or a gusli.

To play the keyboard, you should first choose the object of manipulation: a tongue, a hammer or a tangenot. There is no direct influence of the musician on the strings.

acoustic instruments

The string during vibration will always make a quiet sound. Therefore, special designs were invented to enhance the tonality. In plucked instruments they are called drums. During oscillation, sound enters a closed space, creating an echo, and leaves it amplified several times. The larger the drum, the higher the volume of the melody.

Acoustic stringed musical instruments are always made only from high-quality wood: spruce or maple. These materials are durable, flexible and lightweight. Some instruments can be made from carbon fibers (cello).

electronic sound

To increase the volume at the beginning of the 20th century, so-called diaphragm resonators or bells were used in violins. Similar designs were previously used in mechanical gramophones.

By the 1920s, resonators were slowly disappearing as electronic sound amplifiers took their place. Their principle of operation was based on a magnetic pickup that received vibrations, converted them into a powerful signal and gave out notes through the speakers.

Over time, solid-body instruments appeared, in which unnecessary noise, squeaks and echoes were eliminated. Modern amplifying musical equipment allows not only to increase the sound volume, but also to give it additional effects.

In the class of acoustic instruments, strings are the most common. This is due to the demand for them from all consumer groups. Their use is universal: in the concert hall (in ensembles and solo), for home music-making and in field conditions.

In the assortment of stringed instruments, the leading role belongs to plucked instruments, which is explained by their small weight and dimensions, satisfactory sound range, expressive timbre, high level of reliability and maintainability.

Plucked instruments are distinguished by the number of strings, the sound range, the intervals between the sounds of open strings, the shape of the body, the exterior finish, and the design of the main components.

Plucked instruments include: guitars, balalaikas, domras, mandolins, various national instruments (psaltery, banduras, cymbals, etc.).

A plucked instrument is also a harp - a very complex multi-stringed instrument designed for large symphony orchestras. They are released in limited quantities.

The guitar is the most popular plucked instrument. There are the following types of guitars: Spanish, Russian, Hawaiian. The Spanish (South European) six-string guitar is considered classical. By the number of strings, guitars are: twelve-, six-, seven-string. The most widespread are seven- and six-string.

Depending on the length of the working part of the string (mensur), the following types of guitars are distinguished: large (concert), normal (male), reduced sizes - tertz (ladies), quarts and fifths (school). Downsized guitars are named for the interval they sound higher than normal guitars. In table. the length of the scale of the above types of guitars is given.

The seven-string guitar (Russian) has a sound range from З 1 / 4 to З 1 / 2 octaves from the large octave D to the second octave la. The six-string guitar has a range from E of the big octave to A-sharp of the second octave.

Hawaiian guitars have an extremely limited use, mainly for concert activities. They have a melodious, vibrating sound. Range - 3/2 octaves.

The guitar consists of the following main units: body with shells, tongs, soundboard, bottom, springs, stand, plates, neck and peg mechanics.

The body is designed to amplify the sound vibrations of the strings.

It has the shape of a figure-eight and consists of a flat upper (1) and a somewhat convex lower deck - the bottom (2). The decks are interconnected by two right and left shells (9), the ends of which are attached from the inside to the upper (6) and lower (7) tongs. Counter-shells (8) are glued to the shells, creating the necessary area for gluing the decks. Shells, counter-shells and tongs form the body frame. To the inner surface of the decks, in their middle part, springs (17) are glued - bars of various sections, which serve to create the necessary resistance to string tension and uniform propagation of sound vibrations.

The resonator hole (15) of the guitar has a round shape, slightly larger in size than that of other plucked instruments. Below the resonator hole (socket), a support (12) is fixedly glued, which has holes and buttons for fixing the strings (19).

The neck is the most important knot; the convenience of the game depends on how correctly its width, thickness and profile of the oval are chosen. The neck of the guitar (4) is wide, its lower thickened part is called the heel. A hole is drilled in the heel for the connecting screw. At the top of the neck is a wooden or bone nut (11) with slots for the strings. The saddle is located on the stand (12) for the strings. The distance between the nut and saddle is called the scale of the guitar. The headstock has a mechanism with pegs (21) to secure the strings.

The neck of the guitar, like all plucked instruments, is divided into parts - frets with fret plates made of brass or nickel boron wire embedded in it.

The breakdown of the neck into beats must be accurate. Fret breaking is based on the principle of changing the length of the working part of the string. The length of each fret should be such that, shortening the length of the string by this amount, the pitch would change each time by half a step, i.e., the breakdown of the frets is based on obtaining a twelve-step equal temperament system. Fret spacing accuracy is one of the most important indicators of the quality of instruments; violation of the fingerboard splitting rule makes it impossible to tune the instrument and play it.

Guitars are produced in standard, premium and premium quality. They differ in the materials used and the quality of the finish.

The body of the guitar is made of birch or beech plywood, the neck is made of hardwood - maple, beech, birch; fretboard - pear, ebony, beech; sills - from hornbeam, plastic, bone; stand - beech, maple, walnut, plastic; arrow - from beech, birch, maple; strings - steel, bass - are wrapped with a cantle. Large guitars use nylon strings.

The balalaika is an old Russian instrument with a sharp, piercing timbre, used for solo performance and playing string instruments in orchestras. Balalaikas are produced in two varieties: prima three-string, four-string (with the first paired string), six-string (with all paired strings) and orchestral three-strings - second, viola, bass, double bass, differing in scale length:

♦ prima - with a scale length of 435 mm;

♦ second - with a scale length of 475 mm;

♦ viola - with a scale length of 535 mm;

♦ bass - 760 mm;

♦ double bass - 1100 mm.

The balalaika prima is the usual, most common, used as a solo and orchestral instrument. It has significant musical and technical capabilities.

Balalaikas second, viola, bass and double bass are used in orchestras and are called orchestral instruments. The second and viola are mostly accompanying instruments.

The build of all types of balalaikas is a quarter.

Balalaikas from prima to double bass make up the balalaika family. Sound range from 1 3/4 to 2 1/r octaves.

Balalaikas, like mandolins, domras, have many parts and assemblies of the same name with guitars.

The balalaika consists of a body, neck and head. The body of the balalaika is triangular in shape, the bottom is slightly convex, ribbed, made up of separate rivet plates. The number of rivets can be from five to ten (12, 13, 14). The rivets in the upper part of the body are attached to the upper collar (5) and connected to the neck.

Family of orchestral balalaikas

From below, the rivets are glued to the back (10), which is, as it were, the base of the tool. Seagulls (7) are glued along the perimeter, giving the body rigidity. A resonant deck (8) is placed on the contra-beam, consisting of several specially selected resonant spruce boards. In custom instruments, a tuned deck is used, that is, a deck that sounds in a certain tone. The deck has the shape of an isosceles triangle, the base of which is straight, and the sides are somewhat curved. A resonator hole-rosette is cut out in the soundboard, having an ornament in the form of a circle or a polyhedron made of mother-of-pearl, plastic, valuable wood. On the right side, the deck is covered with a shell (18), which protects it from damage. Small strips-springs (6) are glued to the inside of the deck, giving it elasticity and increasing the purity of the sound. Below the rosette (19), a movable stand is installed on the soundboard, which transmits the vibrations of the strings to the soundboard. The stand determines the height of the strings above the fingerboard and limits the working length of the strings. The connection between the soundboard and the body is covered with a lining. On the edge of the deck in the lower part of the body there is a saddle (11). The adhesive neck is integral with the body, has the same purpose as the neck of the guitar,

the headstock (1) with a peg mechanism (25) is attached to the neck. The peg mechanism has worm gears for tensioning and tuning the strings (22). Along the entire neck, at a certain distance from one another, small transverse metal plates are cut, protruding above the neck and dividing it into frets (23).

Sounds are extracted by pinching with fingers, less often by hitting. mediator. The mediator is a special flat oval plate, it is made of plastic or tortoise shell. Tortoiseshell picks are considered the best.

According to the exterior finish and materials used, balalaikas are produced in ordinary and high quality.

Balalaika body rivets are made of hard hardwood - maple, birch, beech. Sometimes they are made pressed from wood fiber pulp.

The back is made of spruce, lined with birch or beech veneer; deck - from straight-grained, well-dried resonant spruce; stand on the deck - beech or maple. Corners are made from stained maple and birch veneer; dumplings - from spruce. On the shell is stained birch, maple veneer or pear.

The neck is made of hard wood - maple, beech, hornbeam, birch; fretboard - stained maple, hornbeam, pear or ebony; dots on the neck - made of plastic or mother-of-pearl; fret plates - made of brass or nickel silver; lower and upper nut - from hornbeam, ebony, plastic, metal and bone; strings are made of steel. For low-pitched instruments, the strings are wrapped with copper wire; vein and synthetic strings are also used.

Balalaikas of special and individual production differ from the usual orchestral musical instrument in terms of sound strength and timbre features, external finishing of details and selection of wood species.

Domra- Russian folk instrument, unlike the balalaika, has a less sharp and softer and more melodious timbre.

Domras produce three-string quarters and four-strings fifths. The sound range of domra is from 2/2 to Z1/2 octaves.

Depending on the size, a family of domras is made, the length of the scales of which is presented in Table.

Domra is used for solo playing and in string orchestras.

The characteristics of the domra family are given in Table.

Domra, like the balalaika, consists of a body and neck, tightly connected.

Domra differs from the balalaika in its rounded "pumpkin-shaped" body. It consists of seven to nine bent rivets, the ends of which are attached to the upper and lower collars, a deck with a rosette, a shell, counter-beams, springs, and a movable stand.

The neck of the domra is longer than that of the balalaika; at the domra they put three or four strings, fixed with the help of a string holder. Domra is made from the same materials as balalaikas.

According to the quality of the finish and the materials used, domras are distinguished between ordinary and high quality.

Mandolin- a popular folk instrument: together with guitars, mandolins make up the Neapolitan orchestra; it has a bright and melodious timbre. Mandolins are produced oval, semi-oval and flat. The different construction of the body of the instruments gives them a specific timbre of sound.

The body of a flat mandolin consists of a shell, upper and lower tongs, deck, bottom, springs, arrows. The parts are made from the same materials and have the same purpose as similar guitar body parts.

The body of a semi-oval mandolin consists of a slightly convex bottom (glued from 5-7 rivets or bent plywood), shells, counter-shells, upper and lower tongs, arrow, soundboard, spring, facing, string holder. It is made from the same materials as the parts of the guitar.

The oval mandolin is pear shaped. Consists of rivets (from 15 to 30), cleats, counter-strings, springs, side, trim and string holder; barrels of extreme, wider staves; figured shield, soundboard, which has a break at a distance of 3-4 mm below the stand, necessary to increase the pressure of the strings on the soundboard.

The neck, as a rule, is one piece with the body, but can also be removable.

The head of the mandolin has eight pegs (four on each side). The purpose and name of the parts are the same as the parts of the guitar. When extracting sounds, a mediator is used.

Oval mandolins have a sound with a nasal tinge. Semi-oval sounds more bright with a less pronounced nasal tint. Flat mandolins sound more open and harsh. In table. given, the basic data of the above mandolins

A family of mandolins is produced: piccolo, alto (mandola), lute, bass and double bass.

According to the quality of the finish and the materials used, mandolins are distinguished between ordinary and high quality.

Harp - a multi-stringed instrument (46 strings), is part of the symphony orchestra and many instrumental ensembles; in addition, it is often used as a solo and accompanying instrument.

The harp is a triangular frame with strings stretched between its two sides. The underside of the frame, to which the strings are attached, is shaped like a hollow box that serves as a resonator. The body of the harp is usually richly decorated with carvings, ornaments and gilding.

The harp is tuned in a major scale. The restructuring of the scale to other keys is carried out by switching the pedals located at the base of the harp. To guide the musician when playing, the C and F strings in all octaves are colored red and blue.

The sounding range of the harps should be equal to 6/2 octaves, ranging from the D-flat note of the contra-octave to the G-sharp note of the fourth octave.

Harps are produced in limited quantities.

Banjo- the national instrument of American blacks, has recently gained popularity in pop ensembles of our country.

The banjo consists of a ring-shaped body-hoop, on one side tightened with leather, which serves as a soundboard. To regulate the tension of the deck and its settings are special screws. The neck and head of the instrument are conventional. The strings are steel and are played with a plectrum. The number of strings and their tuning may vary depending on the size and type of banjo. The appearance of the banjo is shown in

Spare parts and accessories

Spare parts and accessories for plucked instruments are: strings for each instrument (single or in sets), peg mechanism, string holders, stands, picks (plectrums), cases and covers.

A fairly large number of musical instruments belong to the plucked group. These are harp, guitar, balalaika, lute, mandolin, dombra and many others. How did the most famous of them appear, which have survived to this day? The history of many of these musical instruments is full of interesting facts.

Where did the harp come from?

The harp is a plucked musical instrument that appeared one of the very first on Earth. The harp was originally modified from a conventional hunting bow. Apparently, even then, the ancient man tried, in addition to one bowstring, to attach several more “strings” to its base. Interestingly, this tool is also mentioned in ancient Egyptian hieroglyphs. In this letter, each hieroglyph denotes a certain concept. When the Egyptians wanted to write the word "beautiful", "beautiful", they painted exactly the harp. It was known to the ancient Egyptians as early as 3 thousand years BC. The lyre and harp are the two closest relatives of the hunting bow.

Playing the harp in Ireland

Irish harpists were once very revered. In ancient times, they stood at the next level of the hierarchy after the leaders. Often the harpers were blind - Irish bards read poetry to their game. The musicians performed the ancient sagas using a small portable harp. This plucked musical instrument sounds very melodic. It is very often used by composers when it is necessary to create a mysterious atmosphere or present a mysterious natural image to the listener.

Where does the modern guitar come from?

Researchers of the history of music still cannot give an unambiguous answer to the question of the appearance of the guitar. The tools that are its prototypes date back to several millennia BC. It is believed that the origin of the guitar is also associated with the use of a hunting bow. The progenitors of the modern guitar were found by geologists in the excavations of the settlements of the ancient Egyptians. This plucked musical instrument appeared here about 4 thousand years ago. Presumably, it was from Egypt that it was distributed throughout the Mediterranean coast.

Kifara - the progenitor of the Spanish guitar

The ancient analogue of the guitar was an instrument called the kithara. It is very similar to the guitars in use today. Even today in Asian countries you can find a small musical instrument called "kinira". In ancient times, the progenitors of guitars had only two or three strings. Only in the 16th century did a guitar with five strings appear in Spain. It is here that it receives the greatest, in comparison with other European countries, distribution. The guitar from that time began to be called the national

The history of the balalaika in Rus'

Everyone knows the stringed plucked musical instrument, which has become one of the national symbols of Rus' - this is the balalaika. When she appeared in Russia, no one can say for sure. There is an assumption that the balalaika originates from the dombra, which was played by the Kirghiz-kaisaks. The earliest references to the balalaika in history date back to 1688.

However, one thing is certain - this plucked musical instrument itself was invented by the common people. The serfs, in order to forget about their hard lot for a while, loved to have fun and play the balalaika. It was also used by buffoons who traveled to fairs with performances.

A sad story is connected with the ban on the use of the balalaika by Tsar Alexei Mikhailovich. The angry ruler at one time ordered the destruction of all plucked musical instruments that the population had. If anyone dares to disobey the king, he will be severely flogged and sent into exile. However, after the death of the autocrat, the ban was lifted, and the balalaika sounded again in Russian huts.

National musical instrument of Georgia

And what kind of plucked musical instrument is common on Georgian soil? This panduri is the main instrument for musical accompaniment, under which songs are sung and laudatory poems are read. Panduri also has a "brother" - an instrument called chonguri. Outwardly they are very similar, but their musical properties are different. Most often, panduri is found in eastern Georgia. This Georgian plucked musical instrument is still widespread in such areas as Kakheti, Tusheti, Kartli, Pshavkhevsureti.

How did the banjo come about?

This musical instrument is always associated with American country music. However, the banjo boasts a much older history. After all, it has African roots. It is believed that for the first time black slaves, who were brought to American lands, began to play the banjo. The musical instrument itself comes from Africa. Initially, Africans used not even a tree, but a pumpkin to create a banjo. Strings of horsehair or hemp were pulled over it.

Music surrounds us from childhood. And then we have the first musical instruments. Do you remember your first drum or tambourine? And the shiny metallophone, on the records of which you had to knock with a wooden stick? And the pipes with holes on the side? With a certain skill, one could even play simple melodies on them.

Toy instruments are the first step into the world of real music. Now you can buy a variety of musical toys: from simple drums and harmonicas to almost real pianos and synthesizers. Do you think these are just toys? Not at all: in the preparatory classes of music schools, entire noise orchestras are made up of such toys, in which the kids selflessly blow the pipes, beat the drums and tambourines, spur the rhythm with maracas and play the first songs on the xylophone ... And this is their first real step into the world music.

Types of musical instruments

The world of music has its own order and classification. Tools are divided into large groups: strings, keyboards, percussion, brass, and also reed. Which of them appeared earlier, which later, it is now difficult to say for sure. But already the ancient people who shot from a bow noticed that a stretched bowstring sounds, reed tubes, if blown into them, make whistling sounds, and it is convenient to beat the rhythm on any surface with all available means. These items became the progenitors of stringed, wind and percussion instruments already known in ancient Greece. Reeds appeared just as long ago, but keyboards were invented a little later. Let's take a look at these main groups.

Brass

In wind instruments, sound is produced as a result of vibrations of a column of air enclosed inside a tube. The larger the volume of air, the lower the sound it makes.

Wind instruments are divided into two large groups: wooden And copper. Wooden - flute, clarinet, oboe, bassoon, alpine horn ... - are a straight tube with side holes. By closing or opening the holes with the fingers, the musician can shorten the column of air and change the pitch. Modern instruments are often made not from wood, but from other materials, however, according to tradition, they are called wooden.

Copper brass sets the tone for any orchestra, from brass to symphony. Trumpet, horn, trombone, tuba, helicon, a whole family of saxhorns (baritone, tenor, alto) are typical representatives of this loudest group of instruments. Later came the saxophone, the king of jazz.

The pitch of the brass winds changes due to the force of the blown air and the position of the lips. Without additional valves, such a pipe can produce only a limited number of sounds - a natural scale. To expand the range of sound and the ability to hit all sounds, a system of valves was invented - valves that change the height of the air column (like side holes on wooden ones). Copper pipes that are too long, unlike wooden pipes, can be rolled up, giving them a more compact shape. French horn, tuba, helicon are examples of coiled trumpets.

Strings

The bowstring can be considered the prototype of stringed instruments - one of the most important groups of any orchestra. The sound is produced by a vibrating string. To enhance the sound, the strings began to be pulled over the hollow body - this is how the lute and mandolin, cymbals, harp ... and the familiar guitar appeared.

The string group is divided into two main subgroups: bowed And plucked tools. Bowed violins include violins of all varieties: violins, violas, cellos and huge double basses. The sound from them is extracted with a bow, which is driven along the stretched strings. But for plucked strings, a bow is not needed: the musician pinches the string with his fingers, causing it to vibrate. Guitar, balalaika, lute - plucked instruments. As well as the beautiful harp that makes such gentle cooing sounds. But the double bass - a bowed or plucked instrument? Formally, it belongs to the bowed, but often, especially in jazz, it is played with plucks.

Keyboards

If the fingers striking the strings are replaced by hammers, and the hammers are set in motion with the help of keys, we get keyboards tools. First keyboards - clavichords and harpsichords appeared in the Middle Ages. They sounded rather quiet, but very gentle and romantic. And at the beginning of the 18th century, they invented piano- an instrument that could be played both loudly (forte) and softly (piano). The long name is usually shortened to the more familiar "piano". The older brother of the piano - what's the brother - the king! - that's what it's called: piano. This is no longer a tool for small apartments, but for concert halls.

Keyboards include the largest - and one of the most ancient! - musical instruments: organ. This is no longer a percussion keyboard, like a piano and a grand piano, but keyboard wind instrument: not the lungs of the musician, but the blower machine creates a flow of air into the tube system. This huge system is controlled by a complex control panel, which has everything from a manual (that is, manual) keyboard to pedals and register switches. And how could it be otherwise: organs consist of tens of thousands of individual tubes of various sizes! But their range is huge: each tube can sound only on one note, but when there are thousands of them ...

Drums

Percussion instruments were the oldest musical instruments. It was the tapping of rhythm that was the first prehistoric music. The sound can be produced by a stretched membrane (drum, tambourine, oriental darbuka...) or the body of the instrument itself: triangles, cymbals, gongs, castanets and other knockers and rattles. A special group is made up of drums that produce a sound of a certain height: timpani, bells, xylophones. You can already play a melody on them. Percussion ensembles, consisting only of percussion instruments, arrange entire concerts!

Reed

Is there any other way to extract sound? Can. If one end of a plate made of wood or metal is fixed, and the other is left free and forced to oscillate, then we get the simplest tongue - the basis of reed instruments. If there is only one tongue, we get jew's harp. Linguistics include accordions, bayans, accordions and their miniature model - harmonica.

harmonica

On the button accordion and accordion you can see the keys, so they are considered both keyboards and reeds. Some wind instruments are also reeded: for example, in the clarinet and bassoon already familiar to us, the reed is hidden inside the pipe. Therefore, the division of tools into these types is conditional: there are many tools mixed type.

In the 20th century, the friendly musical family was replenished with another large family: electronic instruments. The sound in them is created artificially with the help of electronic circuits, and the first example was the legendary theremin, created back in 1919. Electronic synthesizers can imitate the sound of any instrument and even... play themselves. Unless, of course, someone will make a program. :)

The division of instruments into these groups is just one way of classifying them. There are many others: for example, the Chinese combined tools depending on the material from which they were made: wood, metal, silk and even stone... The methods of classification are not so important. It is much more important to be able to recognize instruments both in appearance and in sound. This is what we will learn.